Short video of hauling a loaded trailer on our dolly. Getting off the Interstate at our exit.
One from a while back. Video at the end.
Moving a tri-axle walking floor trailer with significant frame and suspension damage. Went 25 miles with it, with our low profile trailer dolly.
Rotator Pickup Lift
Lifting a pickup out of a tough spot today with the rotator.
We were able to get a video of a recovery today that didn’t show the name on the truck so we are able to post it. Used our Rotator and 35ton wrecker.
Moving a shed for a customer today. Used our skid steer, landoll, and our skid for moving sheds.
Darrell getting a few hours to spend in the shop today working on sidepuller #3. By building and designing a lot of our own equipment we get a much better product to get us off the road faster, do more jobs with the same truck, and get calls done safer.
Pick, Slide, & Rotate. Pick and swing a fully loaded semi trailer out of the ditch with our rotator.
Setting up a demo for local fire departments to train. Fully loaded concrete truck, 71,780lbs. Drum is also chained to the frame since we will be lifting and setting it down a few times. Huge thanks to one of our local customers for letting us use a truck they have had sitting around which will allow us to train with real weight for real world accidents.
Sliding and Rotating with the new Rotator. 41,940 lbs
4-11-17 Rollover
Here is a video from the rollover we did yesterday. We used our 50 Ton Rotator on the rear and our 50 Ton Wrecker on the front. Went really smooth, the video is sped up a little bit to make it a little shorter about 4:45 min originally. Cant thank our crew enough for not only handling the few recoveries over the last few days but also keeping our regular towing customers taken care of with short ETA's and not forgetting about them during our busy times.
Remember to move over and slow down when you see flashing lights. Here at Glenn's we want to make sure you can see us, which keeps our operators safer, and also possibly you if it's your car we are picking up.
Tanker Rollover we worked tonight. About 5 Seconds were taken out of middle so the company involved wasn't shown. our strap around tank fought us a little bit because of the wet heavy snow, but after that was situated it was a piece of cake. Our 50 Ton Rotator, and our 16 Ton Medium duty handled this call.
Unit 29 Lights
Sam, our new Shop Mechanic / Driver installed a couple light bars on Unit 29 Today
We have the right equipment for any job