Marine Custom Solutions

08/20/2026

Save! Save! Save!

This is the best time to save on your boat projects!

Over the years, Marine Custom Solutions has experienced a very consistent cycle in the marine service industry: everyone wants their boat worked on at the same time.

As spring approaches, our schedule fills extremely quickly. From May through September, demand is at its highest as customers rush to complete maintenance, repairs, electronics installations, rewires, and larger projects during the boating season.

Then winter arrives, and that demand drops dramatically.

Historically, this created a difficult cycle for our business. We would begin hiring additional technicians around March to keep up with the spring and summer workload, only to see work slow significantly by November. In some years, that meant having to reduce our workforce during the winter months.

We want to change that.

Beginning October 1, 2026, Marine Custom Solutions is introducing a new demand-based seasonal labor rate structure.

The goal is simple: encourage customers to plan ahead and help us spread our workload more evenly throughout the year.

Instead of everyone paying higher rates and competing for limited scheduling during the summer rush, customers who have flexibility can move routine maintenance into our Standard Season and schedule larger, labor-intensive projects during December and January, when we offer our lowest labor rates of the year.

For customers considering a major rewire, electronics refit, restoration, mechanical project, or other substantial work, the savings can be significant. A larger project scheduled during December or January can save thousands of dollars in labor compared with having the same work performed during Peak Season.

This approach benefits everyone.

Our customers receive substantial savings for planning ahead. Our summer schedule becomes more manageable. Most importantly, it allows us to provide our skilled technicians with a more consistent workload throughout the year rather than repeatedly expanding and reducing our workforce based on the season.

Keeping experienced employees year-round ultimately means better service, greater consistency, and a more knowledgeable team working on your boat.

December and January project availability will be limited and offered on a first-come, first-served basis.

If you’ve been considering a major project for your boat, we encourage you to start planning early. Take advantage of the slower season, save substantially on labor, and have your boat completed before everyone else starts thinking about boating season.

Plan ahead. Avoid the summer rush. Save on labor.

Marine Custom Solutions
386-387-2929
[email protected]

04/08/2026

Seakeeper Ride 600 install on this 2016 Boston Whaler 34’.

This client was set on refitting his vessel with the SK Ride and we were set on filling these massive trim tab pockets to make this happen. This process isn’t a small feat, requires structural fiberglass knowhow and skill.

We used coosa to fill the space and vacuum bagged it for the best bond with minimal voids. Layers and layers of fiberglass and tedious finish work to make it look like it came this way from the factory!

You won’t see many of these whalers with a rise system due to the added labor of pocket filling. Check out Marine Custom Solutions for all your boating needs!

Seakeeper Ride Seakeeper Boston Whaler, Inc. - Global

04/02/2026

Garmin Kraken trolling motor deals. We pass the saving on to you!

04/02/2026

It’s that time of the year again. Time to blow out the cobwebs from your engine exhaust and get the boat in for service and other upgrades.

Reach may direct at 386-366-3654 for any projects you’ve been waiting to get started.

03/18/2026

Garmin Kraken trolling motors in stock. Upgrade for the summer and get a free lithium battery charger and more.

12/24/2025

11/26/2025

Quick run through of the process in progress of preparing this late 80s Mako Transom that had rotted out. This is the third transom this boat has had and everything before was made with plywood. We have installed one and a half inch Coosa. Once we ripped open the rear, we found that the stringers were also rotted out because they were made with balsa core. After rebuilding the stringers and Transom, we got to installing the Transom Bracket that the customer requested. all in all we had a phenomenal result in the Customer and family were very excited to get on the water.

11/24/2025

2005 Pursuit 3480 full electronics overhaul. We stripped the 20 year old electronics and wiring from the vessel and started with all new modern Garmin electronics, Kraken 110” trolling motor with the Seaswivel XL, Autopilot, Lumitec lighting, Sionyx low light camera, Fusion audio, epoch lithium, victron dc-dc chargers, sterling 12-36v charger and full gloss black acrylics with branded logos and special touches throughout.

The clients were beyond happy as they felt they got a new modern vessel with all the newest tech. They got to be involved in the build process to fit their needs and special requests.

Check out Marine Custom Solutions for all your vessel needs!

11/18/2025

Full pursuit overhaul.