MaxWax Marine, LLC

MaxWax Marine, LLC ⚓️MaxWax Marine – Premium Gelcoat and Fiberglass Repair + Mobile Boat Detailing in MA

⚓️Maxwaxmarine.com

Message us today for a quote!

06/15/2026

Next victim

06/01/2026

Fix your gelcoat chips! It’s not rocket science, just a bit of chemistry. Contact .color.inc and order your factory gelcoat, thicken it with colloidal silica, add MEKP catalyst, and apply.

I’ll post a video with finishing steps (sanding & polishing) when cured.

05/02/2026

Who says you can’t have fun at work

04/27/2026

Just some blue collar guys forced into online content

04/26/2026

“It just needs a quick buff”… more like:

➡️ 600p Sand
➡️ 800p Sand
➡️ 1000p Sand
➡️ 1000p Wet Sand
➡️ Level R
➡️ Elevate
➡️ Finish R
➡️ Hyper Hold Pro Sealant

You get what you pay for.

04/20/2026

This is what happens when gelcoat damage is patched and not repaired properly. The DIY repair “popped” out after hitting the trailer on haul-out.

These chips are very common and we get these done while the crew is already detailing the boat.

To fix the core of the problem, the gelcoat is ground out and sanded. We inspect the fiberglass to ensure there is no further damage. If so, we will cut and lay new glass with enough layers to fill the damaged area, then custom color match gelcoat to cover the new glass.

This process is time intensive and tedious, but will keep water intrusion from rotting the substrate between the gelcoat and fiberglass, ultimately creating more damage and costs down the line.

04/14/2026

Accidents happen… and when they do, call us!

Big thanks to .color.inc for the gelcoat. The hull showed slight fading from years of sun, so we tinted the factory gelcoat a bit lighter to match flawlessly.

This Catalina Sailboat was TIRED… We brought her back to life. We always perform a test spot to get the perfect result. ...
04/13/2026

This Catalina Sailboat was TIRED… We brought her back to life. We always perform a test spot to get the perfect result.

Process:

⚓️ Starke Pure Clean + Venom
⚓️ Starke Quiksand heavy compound
⚓️ Starke Level R
⚓️ Starke Elevate
⚓️ Starke Finish R
⚓️ Starke Hyper Hold Pro Si02 Sealant



03/04/2026

With 2000HP custom turbo-charged motors, there is approximately 12,000 pounds of thrust pushing between two sterndrives. Flexing occurs, typically during a sharp acceleration load.

We tested the area with a moisture meter and the dependable “screwdriver handle” test. Luckily, there was little to no moisture, indicating no rotted core or compromised fiberglass.

Feel free to reach out if you have any questions about stress, cracks, or gelcoat/fiberglass repairs.

Address

Chelsea, MA
02150

Website

Alerts

Be the first to know and let us send you an email when MaxWax Marine, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category