Freemantle Marine Services Ltd

03/11/2025

ceramic coating applied to this classic 6 metre.

22/10/2025

Rudder fabricated and installed on this at Swansea Yacht Club. As per original spec we used 3 plys of 18mm laminated together. The rudder was sheathed with fibreglass and epoxy faired. The original cheeks were reused at the customers request

20/09/2025

Few jobs carried out on this including:
Deck grp repairs and spray applied non-slip Fabricate and install new transom
Custom carbon wear pads
Carbon spinnaker pole repair
New in cockpit

13/09/2025

Nice paint job completed. This has poor gel coat adhesion, we peeled the gel using our gelplane and faired using . Shrink wrap confinement constructed with proper air flow using out mobile atex fans. Next we applied epoxy high build primer followed by epoxy finish primer. The confinement was then re lined internally ready for off white topcoat. To finish up we applied new custom vinyls.
Happy with the results and a lovely transformation giving the boat a new lease of life!

06/06/2025

14/12/2024

Teak deck restoration, gel and grp repairs recently carried out on this Dufour.
Another facelift giving this fine vessel a new lease of life.

04/12/2024

Nice job on this Hanse 411. Great to see the results at the end after all the work. List of works included:
Deep clean, sand, 4 stage compound/wax to all external gel to restore gloss.
Large grp/gel repair on transom
Teak sand
Interior valet including lifting all sole boards
Sand antifoul and re apply
Treat rust on keel
New gaurd wires and polish stanchions
New mastic bead on rub rail and restore rub rail colour
New lazy jacks, traveller lines, mainsheet and furler line all spliced and fitted
Fenders,mooring lines spliced and fitted
Prep primer/antifoul saildrive and new flap/anodes fitted
New name vinyls and hanse logos
New spray hood supplied by Severn Sails

19/11/2024

Paint repairs on this nice example of a Rustler 36

22/10/2024

Instant facelift on this Elan cockpit. New Flexiteek fabricated and installed. Panels vacuum bagged down to ensure super flat finish.