JMDR Training RTO ID 45417

29/09/2025

🚦 Step into the future of rail with the UEE41223 Certificate IV in Rail Signalling 🚦

Are you a licensed electrician or signalling apprentice looking to advance your career?

The UEE41223 Certificate IV in Rail Signalling is a nationally recognised qualification that equips you with the skills to install, maintain, test, and fault-find signalling systems that keep Australia’s rail network moving safely.

✔ Hands-on practical training in track circuits, point machines, relays, signals, and interlockings
✔ Flexible delivery — intensive blocks with workplace integration
✔ Industry-endorsed and aligned to national standards
This qualification prepares you for roles as a Signal Electrician or Signal Technician — in one of the most critical areas of rail infrastructure.

Duration: 14 modules over 18 months of 1 week per module.
📌 Entry requirement: Certificate III in Electrotechnology or an unrestricted Electrician’s Licence (state-based).
There are 2 batches of 6 to 8 candidates each that have already started in 2025 for some of our most trusted Industry Partners.

🚉 Ready to take your career forward?
Enrolments for February 2026 intake are now open.

📞 Contact us today to secure your place!
Email on [email protected]

12/05/2025

🚆 Sydney Trains – Safeworking Practices & Maintenance Procedures Training (EL40) 🚆

Are you ready to enhance your signalling systems knowledge?

Join us for a 5-day face-to-face training course where you'll learn the essential signalling maintenance procedures and safeworking requirements for working on Sydney Trains’ signalling systems.

🗓️ Course Dates: 26th – 30th May 2025
📍 Location: JMDR Training Centre Ingleburn

👉 Don’t miss out!
Click the link below for more information, or to book your spot now!
https://jmdr.com/jmdr-training
We look forward to seeing you there!

14/04/2025

🚨 Book in quickly! 🚨
Need to complete your TFNSW Safely Access the Rail Corridor (SARC) training?
Book in with JMDR Training and learn everything you need from our experienced trainer, who will guide you step by step through the course.

🗓 Course Date: Tuesday, 29th April 2025
🕗 Start Time: 8:00 AM
📍 Location: Ingleburn, NSW – JMDR Training Facility

Spots are limited – don’t miss out!

📲 To book:
🔗 Online: www.jmdr.com
📞 Call: 1300 695 637

24/02/2025

Looking to complete the Signalling Principles One Training Course?
🚂 We’ve got you covered! 🚂
Join us in Ingleburn, NSW from 10th-13th March 2025.
👉 Don’t miss out – book your spot today and start advancing your career!
BOOK HERE: https://enrol.vetenrol.com.au/(S(vjluxtydy104gkidtg05tykg))/Enrol?2020485731
Or view our website for more information:
https://jmdr.com/jmdr-training

12/02/2025

Now is the perfect time to secure your spot for our Access to and Working in a Live Signalling Location training course.

It’s being held at our Ingleburn, NSW training location on the 3rd of March from 1pm.

Spots are limited, so act quickly and book your place today!

https://enrol.vetenrol.com.au/?clientid=VT-JMDR&occuID=6189&priceID=11

Rail Industry Training by experts in the industry JMD Railtech provide specialist training to the rail industry, including Rail Induction (SARC, RIW, RISI), Working ...

04/12/2024

🚨Last Chance to Book Training Before the Year Ends🚨

We’re offering essential training courses before the year wraps up:

•TfNSW Safely Access the Rail Corridor (SARC) at our Ingleburn Training Facility (NSW)
•QR SACR & QR Wet at our Brisbane CBD Training Facility
•Fatigue Management (TLIF2010) at our Brisbane CBD Training Facility

⏳ Get in quick! This is your LAST opportunity to complete these courses before mid-January 2025.

🔗 Secure your spot today by clicking the links below to enrol:

TfNSW SARC – Friday 6th December
https://enrol.vetenrol.com.au/?clientid=VT-JMDR&occuID=5691&priceID=1

TfNSW SARC – Tuesday 17th December
https://enrol.vetenrol.com.au/?clientid=VT-JMDR&occuID=6045&priceID=1

QR SARC – December Dates
https://enrol.vetenrol.com.au/?clientid=VT-JMDR&page=Kalendar.aspx&progid=9

QR WET – December Dates
https://enrol.vetenrol.com.au/?clientid=VT-JMDR&page=Kalendar.aspx&progid=18

Fatigue Management Strategies – December Dates
https://enrol.vetenrol.com.au/?clientid=VT-JMDR&page=Kalendar.aspx&progid=4

13/11/2024

We're now taking bookings for our upcoming ST46 Signal Circuit Inspection and Testing Course at our Ingleburn Training Centre!
The 3-day course will take place on 26th, 27th, and 28th of November 2024.

The center is conveniently located just a short walk from the train station, with plenty of on-site parking available.

Advance your qualifications by learning from our experienced trainer and take the next step in your rail career.

📲 Ready to book? Click here to secure your spot: https://jmdr.com/rail-signalling-courses

For more information about this course or our full range of rail training programs, visit our website: www.jmdr.com

28/08/2024

Enrolments being taken now for our Signal Safeworking and Maintenance Procedures course (EI40) at our purpose built Ingleburn training facility. Our trainer is well versed and experienced in the subject matter.

This training location is a short walk to Ingleburn station, with onsite parking available.

This training course covers the signalling maintenance procedures used in the Sydney Trains network and the safeworking requirements that need to be met by personnel working on their signalling systems.

Bookings for our next course on 9th-13th September 2024 can be made here: https://enrol.vetenrol.com.au/(S(nsewjtoopstirnkh1droje4e))/Enrol?1529069071

27/06/2024

Mānawatia a Matariki.
Happy Māori New Year! 💫

To all in our New Zealand community, this Matariki is a great time to reflect on great achievements throughout the year, and great opportunities for the next. We hope this Matariki is a time of remembrance, joy, and peace for all.

Warm Regards from JMDR.

Follow us JMDR JMDR Training RTO ID 45417

19/06/2024

19/04/2024

Yesterday the JMDR team celebrated Rail R u Ok? Day. JMDR mark Rail R u Ok? Day by encouraging conversations and learning skills we can implement everyday when asking those in our lives - 'Are you okay?'

Rail R u Ok? Day promotes an important message - Take a moment to check in, reach out, and show you care. This message holds significant weight especially in industries such as rail where there can be unique stressors such as long hours, shift work, and the weight of the responsibility of public safety.

Let's start the conversation, break the stigma, and check in on each other.

21/03/2024

Ready to kickstart your career in rail? Look no further!

Secure your spot now for our upcoming Safely Access the Rail Corridor (SARC) Training Course in Sydney CBD.

Gain essential knowledge and skills required for an RIW card and to be able to work in the rail corridor. This course covers rail terminologies, hazards, access and communications protocols, electrical safety and personal and legal requirements.

Plus, why not take care of your mandatory medical with us too? Our CAT3 Rail Medical ensures you're fit to work in the rail environment.

Click the link below to learn more about SARC, and other rail training course we have on offer.
https://jmdr.com/jmdr-training

Rail Industry Training by experts in the industry JMD Railtech provide specialist training to the rail industry, including Rail Induction (SARC, RIW, RISI), Working ...