MSA - Marine Solutions Australia

07/09/2026

With the davit reinstalled, the final stage was completing a controlled load test to verify safe operation and confirm system performance under working load.

Following the overhaul, hydraulic rectification, reassembly and installation, the davit was fully function tested and load tested prior to handover.

From strip-down and refurbishment through to commissioning and final testing

another complete davit project delivered by the MSA team.

Marine Solutions Australia

05/09/2026

Muir has been designing and manufacturing world class anchoring systems in Kingston, Tasmania since 1968 and is still family owned. Marine Solutions Australia are a proud authorised Muir dealer on the Gold Coast.

We size, fit and commission Muir drum winches and stainless windlasses for everything from trailer boats to superyachts. The right rode determines the right winch:

• Chain pairs with a windlass
• Rope/chain pairs with a drum winch
• And the gypsy must match the chain you actually carry… get that wrong and the winch will skip under load, no matter the motor size.

Not sure which winch your boat needs? Our team has prepared a guide to help you choose and size the correct Muir unit, link below OR send us your vessel and your ground tackle details and we'll size the right fit for you!

https://marinesolutions.au/muir-anchor-winches?utm_source=facebook&utm_medium=social&utm_campaign=static-batch-202609&utm_content=muir-dealer

04/09/2026

A proper windlass overhaul is about more than simply replacing parts.
Every component is cleaned, inspected and assessed for wear, corrosion and overall serviceability.
What remains fit for service is retained.
What doesn’t is repaired or replaced as required.
The result a correctly rebuilt windlass, reliable operation and confidence when it matters.

Windlass Overhaul & Service

Marine Solutions Australia

02/09/2026

Windlass rebuild coming together, step by step by the MSA team.

From component inspection and preparation through to reassembly and final setup, precision matters at every stage of the overhaul process.

Is your windlass due for some attention?

Talk to the Marine Solutions Australia team about windlass inspection, servicing, refurbishment and complete overhaul.

Muir Winches Australia

26/08/2026

A lot goes into getting a marine crane back together.

Hydraulic components, fittings, connections and careful assembly each part needs to work together for the system to perform reliably under load.

Precision in the workshop makes the difference when it’s back onboard.

Marine Solutions Australia

24/08/2026

24/08/2026

We’ve been working on a wide range of windlass systems lately, and today we’re showing just how much the size of the vessel changes the scale of the windlass shaft and gypsy.

Same function. Very different scale.

From smaller vessels through to large yachts, the components may vary significantly in size, but correct inspection, servicing and setup remain critical to reliable operation.

Need assistance with your vessel’s windlass system? Get in touch with our team.