Shore Power Marine

03/16/2024

Fusion Apollo 770 deck swap in 2022 Chapparal bowrider. Don’t have to live with that terrible clarion in the side panel for clearance. Relocated the trim tab controller to the stock radio location and open location beside the steering wheel for new receiver.

05/26/2023

A little help from your friends at Shore Power if you’re out this Memorial Day Weekend on how to reset a stereo that won’t power up. Safe and happy boating! 🛥

05/25/2023

Pics of big CC’s, small Zodiacs and everything in between.

06/23/2021

M6 8.8” wake tower speakers cap off any large houseboat build.

06/22/2021

Usually most people never see our wiring but this is a rare spacious aft closet junction in a very long and large Fantasy houseboat. It ties all wiring into the swim platform JL M6 8.8” speakers and 7.7” soffit speakers to go forward 120’ run up to the fly bridge and the amplifier rack below the bridge.
Our intention is for the owner to be able to troubleshoot an issue that may arise, or if ownership changes hands and the boat goes to a different state, another installer can easily see what we’ve wired to service.
But most importantly we never want to make a bad impact on a marine survey when Professor Padgett shows up to grade your vessel.

06/18/2021

Install Photos from the past few weeks.

06/28/2020

Last few days, Yamaha AR-210 from the factory has the Yamalink display up top and the stereo on the bottom. Owner wanted it switched around which worked out pretty nice with a new SPM “no visible screws” trim ring

06/25/2020

Past few nights

06/24/2020

The proper way to fill 3.5” hole left from obsolete Clarion remotes. Searay SLX is a great boat and a great platform to make a stunner.

06/05/2020

Formula 350CBR Fusion Link upgrade to touch panel, new speakers with extra 8 channel amplifier And a custom cut and fit “weaponized swim platform” M6 8.8” replacing the tiny stock 6.5”

06/04/2020

No visible mounting screws on the front panels of Fusion stereos the latest trend in refitting older boats and cutting new ones.

06/04/2020