08/17/2015
Up for sale is my heavily modified FE. I am the original owner and did all the mods to this item.
This is a long post, so read it all if you're interested.
The Details:
-This FE has a Dual Reg Mod done to it. This means it has two air line inputs. One propels the BB, the other exclusively to the solenoids. One of the reasons for this is to run the solenoids at high PSI, while keeping the PSI to the BB low. There is a diagram in the album that shows how this was done.
-You will need to add a splitter to your tank with another regulator going to it. This is two use two different PSIs on this FE.
-The FE frame is modified to allow use of one of my 3D printed Silent Custom real AR15 grip adapters. This means that with little modification (drilling two holes inside a real AR grip, one for the screw, one for the other line) you can enjoy one of these on a VFC or G&P body.
-The screw for the adapter is included, just not pictured.
-The FE upper is Gen 3, the FE frame is Gen 2. FCU is Gen 2 (Not pictured).
-Nozzle is bored out to Red (iirc), poppet is stock.
-The trigger was sanded down so that it would have a natural colored "brushed" look.
-The trigger was modded with a set screw to decrease movement of the trigger when on "SAFE"
-The trigger board was modified so as to make the solenoid plugs "remote", to make room for the second air line fitting
-This FE was modified to accept use of KWA ERG magazines. Normal AEG magazines should also work just fine.
-The frame has a hole that was tapped for a small set screw so as to block the selector plate from going into "FULL". This is entirely up to you wether you want a set screw there or not.
-This FE will NOT come with a data cable.
-Comes with PolarStar's Ambi Selector Bar (Not pictured)
-Comes with a VFC "bolt catch" system. If you have a VFC body, this is always nice to have.
-Asking price is $280 SHIPPED.
-This item is sold AS-IS. No warranties, implied or not.
-My intention is to sell this to someone who has significant experience with HPA systems and understands the function of it enough to answer their own questions once received.
-I am not responsible if you or someone else breaks it somehow.
-If you want/need my dual reg system, just talk to me, we may work something out. I would need a replacement reg though, seeing as this is my only rig. Otherwise, the pictured tank/reg system is not included, and not for sale.
-Item is located in Orange County, CA.
-Item will be shipped within two business days, starting the day after payment is received in full AND cleared.
-PayPal only, or F2F.
-I will not hold items. I know sometimes people are waiting to get paid for something else, but the reality is that I've come across way too many flakes to count.
-By sending me payment you agree that you have read and accept all the terms above.
FAQs:
-Can I convert it back to normal function with one line?
You could, but you may find that it is much more effort than its worth.
-What is that hole in the middle of the frame?
That used to be where the normal body pin (the one that goes above the trigger) went. It was widened to accomodate a real anti-rotation pin.
-Can the grip mod work of a brand other than VFC or G&P?
Never tested it on any other brand than those two, so I can't say for sure.
-Why the low price?
I want to sell it to someone who won't put up a fuss with prices and I don't care about getting the maximum I can out of it.
So again, asking price is $280 shipped, sold to someone who knows their way around FEs and isn't scared of some mods.
