SasquatchTuned

06/19/2022

Now offering a performance tuning service in eastern Colorado; Drop your vehicle off at the shop for a pre-dyno inspection, and for your convenience, I will transport it in an enclosed trailer to a rental dyno on the front range for a set appointment. Only accepting HP Tuners supported vehicles and standalone systems at this moment. Customer will cover HPT credits, as well as rental fee.

10/03/2020

Estimated ~21 WHP ~41WTQ gain on a 2014 5.7L Hemi. No dyno sheet, tuned on the road. Estimation based on logged airflow before and after. Send a message for all of your tuning needs!

09/28/2020

New tools! Many newer Bosch, Siemens, and other modules supported over OBD as well as bench. Made sure to pony up for a master tool specifically because I don’t want to be putting out other people’s rehashed, cookie cutter software when most cars are a bit different from each other. Very excited to put the MMS Flex to use!

09/22/2020

https://www.sasquatchtuned.com/post/pumping-air-through-a-s54b32-forced-induction-vanos-optimization

VANOS, BMW's variable valve timing system, can prove useful in building and maintaining torque.

09/21/2020

What platforms are your picks for power package R&D and remapping? These are mine. I see potential in the N54/N55 with hybrid GDI/port fueling, as well as MPFI only. I also believe there are closed deck conversion kits for them. I see the B58 as a good one to get into due to the demand, and ease of reflashing due to it sharing the same powerplant as some newer BMW cars; the downside I see to that one is they are likely still under powertrain warranty. Let me know your picks in the comments!

04/27/2020

Officially a LLC! 🎉 HP Tuners, Cobb, Stand-alone systems, MS4x, MSS54 - shoot me a PM and let’s make some power!!!

01/19/2020

The fl**ge for the M50 intake manifold was test fit last night onto my M54 engine; keep in mind this is just a test fit on an identical engine to the one it is actually going on. This is piece 1/3 of the manifold. I know I’m excited about this, as well as the client.