Deep River Tech LLC

05/23/2026

My guy Rick brought his beautiful 622 by to get his long awaited AT2 XL installed and we went out and found a couple walleyes with it afterwards.

All systems are go and now I just need to talk him into a pole from and he will be ready to really lay the wood to em.

Thank you Rick !

05/19/2026

Jacob brought his Lowe by for the third consecutive year to get another couple things adjusted before he’s full swing fishin mode.

We dropped in a set of lithiums he brought us and got him set up with a new 3 bank charger and extended it to the cranker for to alleviate some stress on the cranking battery tha was previously unattended. We tied in both his16v dedicated electronics battery charger and the new 3 bank to a single charging receptacle so no more worrying about those pesky 3 way extension cord blocks.

And while we were in there we got it lookin pretty clean for him aswell.

Thank you for always trusting me to take care of your rig Jacob. I’m sure by the time this gets posted it will have had a limit of eyes in the box a time or 5!
Enjoy !

05/14/2026

Had the pleasure of working with the other day to get these 8617’s squared away.

Certainly not what we typically find ourselves standing at the helm of!

Happy to work with other local businesses to keep people happy and make sure everything is up to s***f!!

Blessed beyond measure !

05/12/2026

Jim brought by his new Lund pro v bass to get a set of lithiums dropped in, a terrova mounted in the bow , and software updates all around.

Reds fabrication and repair built me a nice cantilever bracket for the trolling motor to get clearances perfect, and the install went smoothe as butter overall.

Than you Jim ! Welcome to the DRT family.

05/09/2026

Jared brought out his BEAUTIFUL older 520 Ranger to have a set of .pole sportsman’s dropped on and an in hull transducer installed for his xplore units.

Poles came out great and I give props when the credit is due , his battery compartment is looking quite good from some hard work in his end. We sent him home with a couple recommendations and in a couple weeks he will have her dialed in perfectly no doubt.

Thank you Jared ! Welcome the DRT family.

05/06/2026

05/04/2026

Phil brought his new impact by for some electronics work.

He is a return customer of mine so I had a good grasp on what he was lookin for from the get go when he told me he was gettin a new rig !

all the way around and some and a harness to give it some juice.

These Marine Integrated Solutions cable tie holders made a perfect match for the transom and were used round trip on this aluminum hull for a convenient and tough clean up.

.

04/27/2026

David brought up his 18 ft Starweld for some much needed upgrading! A pair of used 106’s and LVS34 , and a 12/100 lithium from sending juice through a harness.

As always the are lookin great , and the breakaway Jr getting him in a cost effective yet very well built pole.

The boys over at Marine Integrated Solutions and I have been working on things to bring to the freshwater market that we just can’t live without. And this GLS10 bracket is the newest addition to their lineup.

This allowed me to take an aluminum boat with very limited space , but some unused space on the outside wall, and make it usable. Their adhesive is incredibly strong , and the composite bracket will help to mitigate any vibration transmitted through the metal hull into the module. This will now be a regular component to our installations on aluminum hulls, and when we have to mount a black box in an unfriendly location.

Thanks for trusting DRT

12/25/2025

Wishing everyone a Merry Christmas and warmer weather !

Thank you to everyone who Christmas/ Black Friday shopped with DRT and thank you to all of our incredible clients currently and future. You guys make work fun !

May you all be blessed this holiday season beyond measure !

Joy to the world , our lord has come !