Holeshot Propeller Repair

Contact the business

Holeshot Propeller Repair I repair propellers for inboard tournament ski and wake boats! Aluminum starts at $100. Nibral starts at $200. Teak platform re finishing.

Both Nibral and Brass propellers and stainless as well. 29 years experienced as a licensed automotive technician with a passion and obsession for boats. Stainless starts at 260$
Full gelcoat restoration / wet sand ,cut polish, with ceramic coating and interior detail -2000$ on a 18-22’ boat. Also do gelcoat repairs and fibreglass repairs.

Shout out to Recreational power sports ! I appreciate your business and continued support for my little one man operati...
08/23/2026

Shout out to Recreational power sports ! I appreciate your business and continued support for my little one man operation! Was a pleasure to repair this beauty for you!!

Found that the transom on this heyday just didn’t have enough meat on it to be able to handle the pressure of surf tabs....
07/05/2026

Found that the transom on this heyday just didn’t have enough meat on it to be able to handle the pressure of surf tabs. To resolve this issue the made two composite plates to be fitted to the transom. First repaired the damage from the tabs that prompted the discovery of the glass being thin to begin with. Then counter sunk 12 holes. Sanded the transom and cleaned then added 3m 5200 to the back side and screwed it to the transom making sure all screws also had 5200 on all threads. Once that was done. I did my best to Color match the black. Cabosiled the edge of the plate all the way around. Added a thin layer of strand on the edge before adding one layer of fine woven cloth. Once dry the sanded it out. Made some touch ups to the counter sunk holes as there were also filled with cabosil and resin. When touch ups dried she got sanded once more then sprayed black gel. With out a doubt I am sure she will be strong enough to hold surf tabs now !!

Extensive spider cracks. Boat is the perfect example why we do not do repairs with bondo!! While the repair looked good...
03/07/2026

Extensive spider cracks. Boat is the perfect example why we do not do repairs with bondo!! While the repair looked good at first site, this unfortunately lasted about ten min into its first trip onto the water. This boat was originally a trade in at a boat dealer in southern Alberta. The previous owner had a accident but instead of going about the repairs in the honest way they chose to quickly trade it off on another and by the time the truth had showed its ugly side it was too late. He other sad part I find is that the amount of t of work that went into this repair was horrendous!! As in the person that did this job in the first place could have taken a few extra hours and just done it properly. In the end I had the pleasure of making this boat once again a beauty on the water!!

Duo prop for sale $1100 pm me if interested!
08/18/2025

Duo prop for sale $1100 pm me if interested!

Had a older Lund come in where the customer wanted a re power. Sources a 2019 Merc to replace his 72 Chrysler 70 hp. Re...
08/18/2025

Had a older Lund come in where the customer wanted a re power. Sources a 2019 Merc to replace his 72 Chrysler 70 hp. Re enforced the transom mount with a heavier aluminum plate to mount the Merc after removal of the Chrysler outboard. Once installed. The controls and cables were swapped with new and everything neatly tied back. Tested the movement of everything and hooked the hose up to test the engine running. Was super happy to have some videos sent back by the customer of her maiden voyage. Enjoy thanks.

Some before and after gel coat restoration on a beautiful example of a ski brendella. Love how this gel comes back to s...
08/18/2025

Some before and after gel coat restoration on a beautiful example of a ski brendella. Love how this gel comes back to shine much like the day she was new. Of course there was lots of work to go into gettin her to look as good as new again but just wanted to show how well that can be on the bow of this particular boat.

Some progress photos of the last month of work every day !! Rebuild chine on port side , rebuild the keel where the tra...
04/09/2025

Some progress photos of the last month of work every day !! Rebuild chine on port side , rebuild the keel where the tracking fins mount. Straightened three tracking fins as well as the strut! The prop can not be helped but it made the wall of fame. Just faring out the strut mount repairs on the hull. Then spray white gel and black gel. Very happy with how the blue turned out ! More photos to come. Stay tuned.

02/05/2025

Not sure but I don’t think I have ever posted about my Frankenstein project , aka the Boatercycle! This is at this point been four years since I started this. Still doesn’t look like much but I’m finally ready to start actually testing this thing. Many online say it can’t be done or that it just won’t work and to be honest I don’t see why it would t but we are going to end out to settle this argument once and for all. So the next person that try’s to tell me why it won’t work can have a good look at the true evidence. For all I know it might sink to the bottom. lol or it could be scary as all heck. Anyone know what this is ? If you can guess that is please leave a comment with your answer. I’ll tell you in my next post. ;)

Address

Edmonton, AB

Website

Alerts

Be the first to know and let us send you an email when Holeshot Propeller Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Holeshot Propeller Repair:

Shortcuts

Share